NETGEAR FVS318v2/FVS318v1 ProSafe VPN Firewall Router Firmware 2.4 - NETGEAR FVS318v2/FVS318v1 Cable/DSL ProSafe VPN Firewall Router Firmware 2.4. A Smart Wizard Configuration Assistant has been added to help guide you in the initial configuration of the router and connection to the Internet. To use the Configuration Assistant, the router must be in the default manufacturing state. You can reset the router to the default state in two ways: (1) press and hold the reset button on the rear of the router for more than 10 seconds; or (2) click Erase in the routers Backup Settings menu. Modifications and Bug Fixes:-- Improved Oray DDNS client.--Attached Devices page... Далее...

NETGEAR XE102 Wall-Plugged Ethernet Bridge Firmware Initial Release - NETGEAR XE102 Wall-Plugged Ethernet Bridge Firmware Initial Release.

NETGEAR WG102 Wireless Access Point Firmware 3.0.7 - NETGEAR WG102 Wireless Access Point Firmware 3.0.7. Added support for AutoCell RF management. Bug Fixes in Version 3.0.7:--Tx Power Control can now be set manually.--Added support for more Object Identifiers (OIDs) for MIB II System Group.--Allows using 13 channels in Australia.

NETGEAR GSM7212 Gigabit Switch Firmware 3.1.0.6 - NETGEAR GSM7212 Gigabit Switch Firmware 3.1.0.6. Issues This Firmware Resolves:--When a port was configured as a monitoring port, traffic destined to that port (based on previously learned addresses) was dropped. It should have been broadcast as "unlearned" traffic.--Issuing the command "no shutdown all" might result in a reset of the switch on rare occasions.--Issuing the command "show spanningtree mst detailed 0" returned an error, even though instance 0 was the CST instance.--Issuing "show vlan" returned the list of VLAN IDs as 1-4069, the valid VLAN IDs are 1-4094.--In the interface menu,... Далее...

NETGEAR FWAG114 Router Firmware 1.0.27 - NETGEAR FWAG114 ProSafe Dual Band Wireless VPN Firewall Router Firmware 1.0.27. Features Added or Modified:--Add support for static IP option in PPPoE client mode.--Modify DHCP client to support the ISP provisioning of the DHCP servers.--Added the VPN state machine code for keep alive requirements of EU ISPs.

NETGEAR FR328S Router Firmware 1413 - NETGEAR FR328S ProSafe Firewall with Dial Backup Port Router Firmware 1413. Bug Fixes Only - This release does not add new functionality.

NETGEAR WGE111 Wireless Gaming Adapter Firmware 1012 - NETGEAR WGE111 54 Mbps Wireless Gaming Adapter Firmware 1012. WGE111 Firmware Version 1012 Improvements and Fixes:--Added "g-only" mode.--HTML special characters no longer cause buffer overflow.--When changing"Data Rate", "Authentication mode" or "Channel", DUT no longer reboots.--Fixed the bug causing crashes with many arp request packets.--Fixed the bug causing crashes during site survey.--Fixed that could not get IP address from Solaris 9.--Fixed channel change bug when clicking refresh button on utility state page.--Fixed WEP 128 key2-key4 not working.--Changed TX power if domain is in... Далее...

NETGEAR EA101C Ethernet USB Adapter Driver 11v102 - NETGEAR EA101C 10 Mbps 10BASE-T Ethernet USB Adapter Driver 11v102 (Shipping Version)

NETGEAR WGR101 Wireless Router Firmware 1009 - NETGEAR WGR101 54 Mbps Cable and DSL Wireless Travel Router Firmware 1009. Enhancements Since Version 1007:--Fixed configuration settings not saved properly.--Corrected lack of connection status when PPPoE is in used to connect to ISP.--Fixed blank WAN IP address issue on the Status page provided by WGR101 router manager.

NETGEAR RP334 Cable/DSL Phoneline Router Firmware 3.26 - NETGEAR RP334 Cable/DSL Phoneline Router Firmware 3.26. New Features: This version supports the login protocol for Telstra BigPond broadband service (Australia). For more details please refer to the RP334 Release Notes.doc file in the downloaded .zip file. Modifications and Bug Fixes:--Added Ў°Respond to Ping on Internet WAN PortЎ± check box. Ping is in Stealth mode by default.--Add second DNS Server box in Wizard.--Updated Schedule settings; Schedule is now able to run through midnight.--Added Daylight saving time check box.--Added Initial time-stamp to log.--Renamed Ў°Default ServerЎ± to... Далее...

NETGEAR WG302 Wireless Access Point Firmware 4.0.4 - NETGEAR WG302 Wireless Access Point Firmware 4.0.4. Note: Upgrade to this version only if you need WPA2. Otherwise, use firmware version 3.0.7.--Support for WPA2.--Fixed the Web GUI firmware upgrade occasional failed problem.--Fixed occasionally client cannot reassociate the AP problem.

NETGEAR WGM511 Pre-N Wireless PC Card Driver Initial Release Version - NETGEAR WGM511 Pre-N Wireless PC Card Driver Initial Release Version

NETGEAR FR318/FV318 Router Firmware Upgrade 6.3.1.0 - NETGEAR FR318/FV318 Cable or DSL Firewall Router Firmware Upgrade 6.3.1.0. New Features and Enhancements:--A new feature has been added that allows the user to Enable Windows Messenger Support.--A new Feature has been added that allows the user to manually set the time in the firewall.--A new feature has been added that allows the user to add Network Time servers by IP address.--Support has been added for NAT Traversal.

NETGEAR WAG302 Wireless Access Point Firmware 1.0.3 - NETGEAR WAG302 ProSafe Dual Band Wireless Access Point Firmware 1.0.3. Adds DFS Support for European countries.

NETGEAR FVS328 ProSafe VPN Firewall Router Firmware 1.0.14 - NETGEAR FVS328 ProSafe VPN Firewall with Dial Back-Up Firmware 1.0.14. Modifications and Bug Fixes:--Fixed a problem where remote management access could be lost after a period of time.--Fixed a problem where a local server using port 5050 would not function properly.--Can now accept fragmented IKE packets.--Fixed a problem with using domain names in the VPN IPSec policy.--Fixed a problem where Daylight Saving start time in Egypt was wrong.--Fixed a problem where Daylight Saving end time was wrong in Chile.--Added a checkbox to enable use of a short retry time with ngDDNS.

NETGEAR GSM7324 Gigabit Switch Firmware 3.0.3.2 - NETGEAR GSM7324 Gigabit Switch Firmware 3.0.3.2. The firmware upgrade requires a TFTP server. If you do not have one, go to this Web site to download the free software: http://support.solarwinds.net/updates/New-customerFree.cfm. Corrections:--The VLAN priority setting as configured were not working.--When setting fixed speed 1000M full-duplex for copper port, the switch issued an warning.

NETGEAR WGT634U Wireless Storage Router Firmware 1.4.1.9 - NETGEAR WGT634U 108 Mbps Wireless Storage Router Firmware 1.4.1.9. Installation Instructions:--Option 1 ЁC Use firmware upgrade assistant.--Option 2 ЁC Use standard home router firmware upgrade procedure.--Note: Reset to factory default after a firmware upgrade.

NETGEAR CG814M/CG814W Wireless Cable Modem Gateway USB Driver Windows 98/ME - NETGEAR CG814M/CG814W Wireless Cable Modem Gateway USB Driver Windows 98/ME.

NETGEAR RP114 Cable or DSL Router Firmware 3.26 - NETGEAR RP114 Cable or DSL Router Firmware 3.26.

NETGEAR FVS318v3 ProSafe VPN Firewall Router Firmware 3.0_20 - NETGEAR FVS318v3 Cable/DSL ProSafe VPN Firewall Router Firmware 3.0_20. Added SMTP authentication for email from router. Added UPnP support (OFF by default). Modifications and Bug Fixes:--Enhanced VPN log.--Changed VPN autopolicy default settings.--Fixed port 0 stealth issue.--Added logging of dropped inbound packets.--Fixed MTU issue when FTP server on LAN.--Fixed bidirectional traffic stress issue.--Fixed VPN traffic selector issue.--Fixed VPN AES interop issue with FVS318v1,and FVS318v2.