NETGEAR WAG311 Dual Band Wireless PCI Adapter Firmware 1.3 Beta 2 - NETGEAR WAG311 Dual Band Wireless PCI Adapter Firmware 1.3 Beta 2 Windows 98SE/ME/2000/XP. Added Features Since July 2003:--SuperG 108 Mbps support.--Cisco LEAP support in native UI.--WPA-PSK support in native UI.--WPA support - Windows XP by Microsoft Zero Configuration ( additional service pack by Microsoft may be needed) . Windows 2000, Windows ME and Windows 98 by other supplicant providers such as Funk and MeetingHouse.--Complies with final IEEE 802.11g standard.

NETGEAR FVL328 Router Firmware 2.0 Release 08 - NETGEAR FVL328 Cable/DSL ProSafe High-Speed VPN Firewall Router Firmware 2.0 Release 08. Bug Fixes Only - This release does not add new functionality.

NETGEAR RT314/RT311 DSL & Cable Internet Gateway Router Firmware 3.25 - NETGEAR RT314/RT311 DSL & Cable Internet Gateway Router Firmware 3.25. Please note that this is not a critical upate. If your router is working properly and you do not need the functions mentioned below, you do not need to upgrade your firmware.Revision Note for Version 3.25 1. Provides European PPTP support for proper login+C213.

NETGEAR FWG114Pv2 Router Firmware 1.1_02 - NETGEAR FWG114Pv2 Wireless Firewall with USB Print Server Router Firmware 1.1_02. FWG114Pv2 First available in Oct., 2004, this version is identified by the "v2" following "FWG114P" on the bottom label. The serial number starts with "FG12". Bug Fixes Only - This release does not add new functionality:--Fixed: factory restore resets the wireless region.--Fixed: enabling MAC access control of wireless will cause the device to hangup.--Gives a warning message if port number is greater than 65535 when adding custom service.--Fixed: If NAT off and WAN connection type is PPPoE/PPTP, LAN client PC... Далее...

NETGEAR WGT624v2 Wireless Firewall Router Firmware 4.2.6 - NETGEAR WGT624v2 Wireless Firewall Router Firmware 4.2.6. The WGT624v2 reads "WGT624v2" on the bottom label. New Features and Bug Fixes Since 4.2.4:--With this firmware the WGT624 and WGT624v2 pass the official Microsoft Xbox Live certification.--Static IP option for PPPoE (when applicable with ISP).--UPnP enabled by default.--Fixed firmware downgrade exception (before this release, downgrading from 4.2.4 to previous version required a hardware reset).

NETGEAR FR314 Router Firmware Upgrade 6.3.1.0 - NETGEAR FR314 Cable or DSL Fast Internet Access Firewall Router Firmware Upgrade 6.3.1.0. New Features and Enhancements:--A new feature has been added that allows the user to Enable Windows Messenger Support.--A new Feature has been added that allows the user to manually set the time in the firewall.--A new feature has been added that allows the user to add Network Time servers by IP address.--Support has been added for NAT Traversal.

NETGEAR FWG114P Router Firmware 2.0 Release 18 - NETGEAR FWG114P Wireless Firewall with USB Print Server Router Firmware 2.0 Release 18. FWG114P (aka FWG114Pv1) This version is identified by the "FWG114P" on the bottom label (with no "v2" following it). Bug Fixes Only - This release does not add new functionality:--Fixed a problem where remote management access could be lost after a period of time.--Fixed a problem where a local server using port 5050 would not function properly.--Can now accept fragmented IKE packets.--Fixed a problem with using domain names in the VPN IPSec policy.--Fixed a problem where Daylight Saving start time in... Далее...

NETGEAR FR114W Router Firmware 1.5 Release 13 - NETGEAR FR114W 11 Mbps Cable and DSL ProSafe 802.11b Wireless-Ready Firewall Firmware 1.5 Release 13. NOTE: If upgrading from a version older than v1.3, you must first upgrade to v1.3, then to this release. Enhancements and bug fixes incorporated in the release software version 1.5 Release 13:--Fixed bug in saving of some settings to config file.--Fixed "Apply" button issue.--Now hides ngDDNS (Oray) password.--Allow ending port to be blank when setting port range for single port.--Setup Wizard now checks PPPOE before DHCP.

NETGEAR WG311v2 Wireless PCI Adapter Driver v2.0.0.7 - NETGEAR WG311v2 Wireless PCI Adapter Driver v2.0.0.7. The WG311v2 is labeled "WG311 v2". The serial number starts with WG22.

NETGEAR WPN802 RangeMax Wireless Router Firmware 1.0.40 - NETGEAR WPN802 RangeMax Wireless Router Firmware Initial Release 1.0.40.

NETGEAR FVX538 VPN Firewall Router Firmware 1.6.38 - NETGEAR FVX538 VPN Firewall Router Firmware 1.6.38.--Fixed: Cant turn off SMTP Server Authentication in Logs and email menu.--Improved Radius menu and help.

NETGEAR WGT624v3 Wireless Firewall Router Firmware Beta 1.0.18_1.0.1 - NETGEAR WGT624v3 Wireless Firewall Router Firmware Beta 1.0.18_1.0.1. The WGT624v3 reads "WGT624v3" on the bottom label. The firmware for this version is not compatible with WGT624v2 or WGT624v1.

NETGEAR GA302T PCI Copper Gigabit Adapter Firmware 2.93 - NETGEAR GA302T 32-Bit PCI Copper Gigabit Adapter Firmware 2.93.

NETGEAR MR814v3 Cable/DSL Wireless Router Firmware 5.4_06 - NETGEAR MR814v3 802.11b Cable/DSL Wireless Router Firmware 5.4_06. Adds WPA-PSK. This firmware is only for versions ending with "v3". Do not use it on earlier MR814!

NETGEAR FA510 Network Card Driver 2.04 Windows - NETGEAR FA510 10 and 100 Mpbs PCMCIA Network Card Driver 2.04 Windows.

NETGEAR RT338 Remote Access ISDN Router Firmware 3.24/2.40 - NETGEAR RT338 Remote Access ISDN Router Firmware 3.24/2.40.

NETGEAR DG814 DSL Modem Internet Gateway Firmware 4.10 - NETGEAR DG814 DSL Modem Internet Gateway Firmware 4.10. Modifications and Bug Fixes V4.10:--Improved compatibilty with peer-to-peer applications.--PPPOE login compatibility with BellSouth network fixed.

NETGEAR EA201 Network Card Driver 2.00 - NETGEAR EA201 10 Mbps ISA Network Card Driver 2.00. Adds Windows 2000 support.

NETGEAR WGX102 Wireless Access Point Driver 1.030 - NETGEAR WGX102 54 Mbps Wall-Plugged Wireless Access Point Firmware and Utility 1.030. Release Notes for Version 1030:--Fixed excessive system clock drift. Now, in the worst case, clock will not be off by more than 5 minutes.--Fixed, potential saved configuration corruption issue.--Implemented support for a utility (1006) to allow switching between Router/AP mode without logging into the WGX102 GUI.

NETGEAR WGM124 Pre-N Wireless Router Firmware 1.0.0.11 - NETGEAR WGM124 Pre-N Wireless Router Firmware 1.0.0.11. WGM124 Software Version 1.0 Release 11 Fixes:--Fixes DHCP WAN IP function, when WGM124 canЎЇt get WAN IP in some network environments.--Improves ADSL WAN function: WGM124 will keep trying the ADSL WAN when the network or ADSL modem fails (Idle time out = 0).--Updates Airgo wireless driver to v1.4.0.163, fixing minor compatibility problems, that also affected performance.