NETGEAR WPN311 RangeMax Wireless PCI Adapter Driver Windows 98SE/ME/2000/XP - NETGEAR WPN311 RangeMax Wireless PCI Adapter Driver Initial Release Windows 98SE/ME/2000/XP.

NETGEAR WPN824 RangeMax Wireless Router Firmware 1.0.10 - NETGEAR WPN824 RangeMax Wireless Router Firmware 1.0.10. Fixed or Enhanced in 1.0.10:--There is a performance improvement when connected to WPN511 adapters.--The Test button on Basic Settings page will no longer run endlessly if the WPN824 is not connected to the Internet.--The Welcome page, www.routerlogin.com/welcome.htm no longer appears when the Configuration Assistant completes.--Login page no longer appears before the Configuration Assistant is finished.

NETGEAR WG311 (aka WG311v1) Wireless PCI Adapter Driver v1.3 - NETGEAR WG311 (aka WG311v1) Wireless PCI Adapter Driver v1.3. This first version of the WG311 is labeled "WG311". (This product is now known as the WG311v1, but it was not realized there would be another chipset when it was releaseed.) The serial number starts with WG31. Driver Version: 3.0.0.43, Smart Wireless Utility Version: 2.12.17.3.

NETGEAR FM114P Router Firmware 1.5 Release 13 - NETGEAR FM114P Cable or DSL ProSafe 802.11b Wireless Firewall and Print Server Firmware 1.5 Release 13. NOTE: If upgrading from a version older than v1.3, you must first upgrade to v1.3, then to this release. Enhancements and bug fixes incorporated in the release software version 1.5 Release 13:--Fixed bug in saving of some settings to config file.--Fixed "Apply" button issue.--Now hides ngDDNS (Oray) password.--Allow ending port to be blank when setting port range for single port.--Setup Wizard now checks PPPOE before DHCP.

NETGEAR RP614 (aka RP614v1) Cable or DSL Router Firmware 4.15 - NETGEAR RP614 (aka RP614v1) Cable or DSL Router Firmware 4.15. The RP614v1 is distinguished from the RP614v2 (a different product) by the bottom label. The RP614v1 label reads simply "RP614". Make sure you have the RP614v1 before using this firmware. Enhancements/Changes from 4.14 to 4.15RC4:--Fixed BellSouth Authentication failure.--Fixed FTP Transfer failure.--Fixed Stress test lockup failure.--Fixed PPPoE Authentication failure.

NETGEAR RP614v3 Cable or DSL Router Firmware 6.0 - NETGEAR RP614v3 Cable or DSL Router Firmware 6.0. Warning: This is only for router with a version ending with "v3".

NETGEAR WGU624 Wireless Firewall Router Firmware 1.0.1.10 - NETGEAR WGU624 Double 108Mbps Wireless Firewall Router Firmware 1.0.1.10. Major Features in 1.0.1.10:--Fixes the router not being able to handle P2P client Azureus heavy-traffic load.--Fixes that the router froze if 11a or 11g radio is disabled and "Show Statistics" page is viewed.--Added password change validation, instead of quietly ignoring invalid characters like commas so the customer can log in successfully after password change.

NETGEAR RP614v2 Cable or DSL Router Firmware 5.20 - NETGEAR RP614v2 Cable or DSL Router Firmware 5.20. Warning: This is only for router with a version ending with "v2". Do not load it on versions without the "v2". Fixes and Enhancements:--Fixed PPTP connection issue with some ISPs.--Fixed intermittent router lockup with multiple PCs.--Fixed large block port forwarding issue.--Fixed Gamespy lockup issue.--Fixed "Edit" port triggering table bug.--Fixed intermittent UPnP search reply failure.--Fixed PPPoE small MRU issue.--Fixed DHCP broadcast error.--Fixed static route table bug.--Fixed blocked site entry causes router to hang.--Fixed Targa3 DoS... Далее...

NETGEAR FR114P Router Firmware 1.5 Release 13 - NETGEAR FR114P 4 Port Cable/DSL ProSafe Firewall and Print Server Firmware 1.5 Release 13. NOTE: If upgrading from a version older than v1.3, you must first upgrade to v1.3, then to this release. Enhancements and bug fixes incorporated in the release software version 1.5 Release 13:--Fixed bug in saving of some settings to config file.--Fixed "Apply" button issue.--Now hides ngDDNS (Oray) password.--Allow ending port to be blank when setting port range for single port.--Setup Wizard now checks PPPOE before DHCP.

NETGEAR WG602v3 Wireless Access Point Firmware 1.0.5 - NETGEAR WG602v3 Wireless Access Point Firmware 1.0.5. This version is identified by the "v3" following "WG602" on the bottom label. It has a white case, and the serial number starts with "WG17". New and Fixed:--Adds WPA2 functions, passing the WiFi WPA2 certification.--Adds WMM functions, and passing the WiFi WMM certification.--Upgrades new wireless driver into 3.91.7.0.--Fixed: WPA didnЎЇt work after ACL settings were applied.--Fixed: The wrong help message displayed Ў°under constructЎ±.--Fixed: Implemented Web server timeout and single user access only.--Fix the wrong display: default... Далее...

NETGEAR WPN511 RangeMax Wireless PC Card Driver Windows 98SE/ME/2000/XP - NETGEAR WPN511 RangeMax Wireless PC Card Driver Initial Release Windows 98SE/ME/2000/XP.

NETGEAR WGT624v3 Wireless Firewall Router Firmware Initial Version 1.0.12_1.0.1 - NETGEAR WGT624v3 Wireless Firewall Router Firmware Initial Version 1.0.12_1.0.1. The WGT624v3 reads "WGT624v3" on the bottom label. The firmware for this version is not compatible with WGT624v2 or WGT624v1.

NETGEAR WG511U Double 108 Mbps Wireless PC Card Driver & Utility - NETGEAR WG511U Double 108 Mbps Wireless PC Card Driver & Utility Initial Release.

NETGEAR WG121 Wireless USB 2.0 Adapter Driver 2.0 - NETGEAR WG121 Wireless USB 2.0 Adapter Driver 2.0. This software is compatible with Windows 98SE, Windows ME, Windows 2000 and Windows XP. WPA is supported with Windows XP supplicant and Funk Odyssey. This release does not support WPA with NETGEARs user interface. The WG121 is backward compatible with USB 1.1, however speed is limited to the USBs 14 Mbps. Furthermore, there is some overhead between the USB port and CPU or memory interface, so somewhat less than 14 Mpbs is attained.

NETGEAR DG824M ADSL Modem Internet Gateway Firmware 1.4 Release 01 - NETGEAR DG824M ADSL Modem Internet Gateway Firmware 1.4 Release 01. If you now have firmware version 1.2, you MUST upgrade to 1.3 before upgrading to this version! Link to firmware version 1.3.New Features Overview, Version 1.4 Release 01:--IP over ATM (IPoA) support: RFC1577 Classical IP over ATM and RFC1483 routed over ATM lines are now supported. The Setup Wizard can auto-detect RFC1577.--Country Selection: It is now possible to change the ATM parameters based on country selection in the Setup Wizard. It is also possible to choose the Wireless domain based on country selection in the... Далее...

NETGEAR MR814 (AKA MR814v1) Cable/DSL Wireless Router Firmware 4.14 RC 4 - NETGEAR MR814 (AKA MR814v1) 802.11b Cable/DSL Wireless Router Firmware 4.14 RC 4. Modifications:--NTP improvements.--Fixed issues with BellSouth ISP.--Fixed issues with various Chinese ISPs and PPPoE.

NETGEAR FA120 USB Fast Ethernet Adapter Driver Windows 98/ME/2000/XP - NETGEAR FA120 USB 2.0 Fast Ethernet Adapter Driver Windows 98/ME/2000/XP.

NETGEAR WAG511 Dual Band PC Card Firmware 3.1 Windows 98SE/ME/2000/XP - NETGEAR WAG511 Dual Band PC Card Firmware 3.1 Windows 98SE/ME/2000/XP. Supports Windows 98 SE, Me, 2000 and XP. Improvements:--Fixed issue connecting to access points that use Broadcom chipset and with access control list enabled.--Fixed wireless noise issue.--Allow enable/disable Autocell without restarting computer.

NETGEAR FA101 USB Fast Ethernet Adapter Driver Windows 98/ME/2000/XP - NETGEAR FA101 USB Fast Ethernet Adapter Driver Windows 98/ME/2000/XP.

NETGEAR WGT624 (aka WG624v1) Wireless Firewall Router Firmware 4.2.6 - NETGEAR WGT624 (aka WG624v1) Wireless Firewall Router Firmware 4.2.6. This first version of the WGT624 reads "WGT624" on the bottom label. No "v2" at the end. (This product is known now as the WGT624v1, but at the time it was released, it was not realized there would be another chipset in the future!). New Features and Bug Fixes Since 4.2.4:--With this firmware the WGT624 and WGT624v2 pass the official Microsoft Xbox Live certification.--Static IP option for PPPoE (when applicable with ISP).--UPnP enabled by default.--Fixed firmware downgrade exception (before this release, downgrading from... Далее...